1、避免磕碰這是購得鐵藝門后最先要注意到的一點，鐵藝門在搬運過程中應小心輕放，放置鐵藝門的地方應是硬物不常碰到的地方，地方一經選定，就不應頻繁變動，安裝鐵藝門的墻面還應保持平整，使鐵藝門安裝安穩、平實，若搖晃不穩，日久會使鐵藝門產生輕微變形，影響鐵藝門的使用壽命。

1. Avoiding collisions is the first thing to pay attention to after purchasing an wrought iron door. The wrought iron door should be handled with care during transportation, and the place where it is placed should be a place where hard objects do not often come into contact. Once the place is selected, it should not be frequently changed. The wall on which the wrought iron door is installed should also be kept flat to ensure a stable and solid installation. If it is not shaken steadily, it will cause slight deformation over time, affecting the service life of the wrought iron door.

2、遠離酸堿對鐵藝門有腐蝕作用的酸堿是鐵藝門的“頭號殺手"，鐵藝門上若不慎沾上了，應立即用清水把污處沖凈，再用干棉布擦干。

2. Stay away from acid and alkali, which have a corrosive effect on wrought iron doors. Acid and alkali are the "number one killers" of wrought iron doors. If they accidentally come into contact with wrought iron doors, they should be immediately rinsed with clean water and wiped dry with a dry cotton cloth.

3、定期除塵鐵藝門是在戶外使用的，戶外環境經常是塵土飛揚，時間一久，門上就會落上很多灰塵，這些灰塵會影響門的色澤，還會破壞它的保護膜，因此應該定期用柔軟的棉布擦拭門上的灰塵。對于鐵藝門上的凹陷處和浮雕紋飾中的灰塵，則最好用細軟羊毛刷來除塵。

3. Regular dust removal of wrought iron doors is used outdoors, where the environment is often dusty. Over time, a lot of dust will accumulate on the door, affecting its color and damaging its protective film. Therefore, it is recommended to regularly wipe the dust off the door with a soft cotton cloth. It is best to use a fine soft wool brush to remove dust from the depressions and relief patterns on wrought iron doors.

4、隔絕潮濕鐵藝門應安裝在比較通風的地方，潮濕會使金屬過早出現銹蝕，鍍鉻產生脫膜等，影響門的使用。如逢大霧天氣，應用干棉布擦拭鐵藝上的水珠。若逢雨天，應于雨停后及時把水珠擦干。

4. Moisture resistant wrought iron doors should be installed in a well ventilated area. Moisture can cause premature rusting of metal, peeling of chrome plating, and affect the use of the door. If encountering heavy fog weather, use a dry cotton cloth to wipe the water droplets on the iron work. If it rains, the water droplets should be wiped dry in a timely manner after the rain stops.

5、消除銹跡如果鐵藝大門生了銹，不要自作主張用砂紙打磨。銹跡較小較淺的，可用棉紗蘸機油涂于銹處，稍候片刻，用布揩擦便可消除銹跡。若銹跡已經擴大變重，則應請有關技術人員來維修。

5. Eliminate rust. If the wrought iron gate has rust, do not use sandpaper to polish it on your own. For areas with small and shallow rust stains, cotton yarn dipped in engine oil can be applied to the rust area. After a while, wipe with a cloth to eliminate the rust stains. If the rust has expanded and become heavier, relevant technicians should be invited to repair it.